Did You Know That Most Burglars Are Occasional Burglars?
This means that they really only break in when the opportunity arises. So when it’s as easy, fast, and safe as possible they strike.
Since most burglars work this way you can easily reduce the risk of burglary.
You can do this by making it more difficult for them. The best way to do this is by using locks with pin tumbler protection. Pulling the key is the most popular method of burglary.
By protecting yourself against this, you make it a lot harder for burglars and they will pass by your house more easily.
Especially when you use an anti-tamper device. This looks very conspicuous and gives the burglar a clear signal that you take your security seriously.
How Does Core Extraction Work?
When the key is pulled, the cylinder core is ripped out of the cylinder housing. To do this, the user screws a screw-shaped metal part into the lateral insertion point on the locking cylinder.
This is one of the main tools that burglars use to remove the cylinder core.
Read Also:
 How Does Core Pull Protection Work?
Core pull protection prevents a lock cylinder from breaking when using a pulling screw if the lock is to be opened without a key.
It makes it difficult for unauthorized persons to open doors without a key and provides effective protection against burglary.
Key pull protection is effective burglary protection. Another popular method of bypassing the lock mechanism is to break the lock cylinder.
In this procedure, burglars use a self-tapping threaded pull screw. The thread of this screw is so large that it is firmly anchored to the cylinder housing.
When force is applied, not only the core, but the entire cylinder loosens and breaks.
Lock cylinders with a pull protection core prevent the cylinder core from being pulled out of the housing and make it virtually impossible to open the lock without a key.
The security features are classified in security level 5. The security features are classified in security level 5. If all other opening methods have failed, slotenmaker den haag will also use this procedure.
Key pull protection also acts as drill protection. Even pull screws cannot be inserted into the key’s guide slot.
It is also not possible to break off the locking cylinder. Such hardware is also called a pull protection rosette. This hardware also protects the locking cylinder at the front.
Anti-Torque Hardware
A movable steel plate is installed in front of the cylinder core. The key therefore always fits in the lock, but it is almost impossible to pull the core out of the cylinder with a tool.
With a protective fitting, the entire locking cylinder is covered by a kind of protective casing.
The protective plate protects the core of the locking cylinder and the locking cylinder from being pulled out by force, the locking cylinder is re-drilled and the cylinder core is milled.
The durability of the material depends on its composition and processing. The more stable the hardware is, the more difficult it is to break it open by drilling and the like.
Since breaking a security device takes at least 10-15 minutes and is also noisy, many burglars happily leave it in one attempt.