- ● Fix Faulty Faucets
- ● Avoid Using Chemical Products to Unclog Your Drain
- ● Reduce Your Water Pressure
- ● Remember to Always Drain Your Water Heater
- ● Use a Water Softener
- ● Clear Out Your Septic Tank or Sewer Lines
- ● Check Inside Your Water Heater
- ● Clean out Your Showerheads
- ● Check Your Hoses
- ● Use Hot Water
Regular maintenance of your plumbing system can save you a lot of money. Giving regular attention to your plumbing system will make them last longer and also prevent leaks in your home.
Here are 10 plumbing system maintenance you should do to keep your pipes in good condition. For professional services, contact MPJ Plumbing.
● Fix Faulty Faucets
Faulty faucets tend to drip water constantly. This will waste a lot of water and make you have a huge water bill at the end of the month.
If the problem is not fixed, it can cause other problems in your home. Make sure to check all faucets and showerheads for leaks and make repairs when necessary.
● Avoid Using Chemical Products to Unclog Your Drain
When you have a clogged drain, chemicals can be used to clear the problem. These products do a lot of harm to your pipes. They can erode cast-iron drain pipes.
They do not always unclog your drain completely and you are likely to experience the problem again. Each time you use it, they eat away at your pipes.
● Reduce Your Water Pressure
You should check your water pressure to make sure it is not too high. Turn off all your faucets and check your water pressure. It should be between 30 and 70 psi.
When your water pressure is too high, it can damage your fixtures, not make your appliance as long as they are supposed to, and also increase your water bill.
● Remember to Always Drain Your Water Heater
Another plumbing system maintenance you should always perform is draining your water heater regularly.
This will help you get rid of sediments in your water heater that can cause it to not work properly or stop working completely.
● Use a Water Softener
When there is a high level of mineral content in water, it is considered to be hard. These minerals can build up in your pipes and corrode joints and fittings. The best way to deal with this is to use a water softener.
● Clear Out Your Septic Tank or Sewer Lines
Another important plumbing system maintenance is hiring a professional plumber to help you snake your septic tank every three to six years. This will help to clear out tree roots that usually get into these underground pipes.
● Check Inside Your Water Heater
Another plumbing system maintenance you should look out for is checking inside the burner chamber of your water heater. This is to check if the flames of your heater are still blue. If it has a yellow color, you may need to get your jet cleaned.
● Clean out Your Showerheads
This is another plumbing system maintenance that is usually ignored. You should remove your showerheads and clean out built-up sediments.
● Check Your Hoses
You should also check your hose regularly for cracks or leaks. You should have them replaced once they get old.
● Use Hot Water
This is as simple as it sounds. Pouring hot water down your drain will help to clear out debris down your drain.
Performing maintenance for your plumbing system will save you from unnecessary costs and repairs. You should also contact a professional plumber when you have a problem you do not know how to fix.