When it comes to getting your AC system working again, you can rely on the services of a professional technician.
Contactor
When looking for AC repair, it’s always good to consider the problem of the AC Contactor. This electrical device is at the heart of your AC, so if this component is not functioning properly, the entire system will be affected. A good contractor can last for up to 10 years with proper maintenance.
But it can also fail due to various reasons, so it’s important to know more about them before calling an AC repair service. The AC contactor is the “on/off switch” for your condenser fan and compressor. It controls the voltage that goes to these two important components, and if the contactor isn’t functioning properly, you will find that your compressor isn’t working at all.
Occasionally, this can be due to dust or debris inside the contactor. If this happens, it’s time to find AC service contractors in East Brunswick, because it’s vital to your AC’s functioning. If your outside condensing unit doesn’t shut off or you notice ice on the condensing line, then you probably have a problem with the Contactor.
Leaking Refrigerant
If you are having problems with your AC unit, one of the most common issues is leaking refrigerant. If the leak is not detected immediately, the AC system could experience a catastrophic breakdown, such as a burnt compressor. Leaking refrigerant is not an easy problem to fix, and if you don’t act fast, you could end up with a replacement air conditioner.
If you have noticed a leak, you can use various tools to locate it. In addition to using leak detection equipment, you can also use soap bubbles and listen for the sound of a leaking unit. Lastly, you can pressurize your AC system with nitrogen and use an electronic leak detector to trace the refrigerant.
Tripped Circuit Breaker
If your AC keeps tripping, you’re probably looking for a Tripped circuit breaker in AC repair. While it may sound like a simple problem, it’s not always so straightforward. Sometimes the breaker is bad, or it’s simply loose. You can reset it by nudging it from left to right.
Also, the circuit breaker needs to be a suitable size for the amps your AC needs to operate. In addition, a tripped circuit breaker can also indicate a wiring problem, which may require professional help by someone who knows what’s up.
For safety reasons, it is best to contact an AC repair professional to diagnose the problem. For more safety tips, click here and read more. Always remember that identifying the faulty component is a complex task that requires specific tools and can be dangerous if done alone.
If you’ve already determined the problem is the tripped circuit breaker, you can replace it yourself. A new circuit breaker will be very inexpensive and will be of the same ampacity as the old one, or else trouble will be brewing.
Similarly, a grounded compressor means an electrical wire has tripped inside the compressor. This short-circuiting causes a direct short to the ground, which ignites the oil inside the compressor, causing a fire. Lastly, a tripped circuit breaker in air conditioning repair may be due to an electrical wiring issue.
Read Also:
Overflow Switch
Often overlooked, the Overflow switch is a crucial part of your AC system. If your system is leaking water through the ceiling or drain pan, the switch is to blame. When the float switch is not functioning properly, the water will overflow into the drainage pipe and cause serious water damage to your home.
Fortunately, there are several easy ways to diagnose and repair the problem and save thousands of dollars in the process. A good air conditioning technician should have the proper equipment and experience to diagnose and fix this issue. This type of switch is commonly found in duct systems, which transport the conditioned air from the air handler to different rooms.
Unless the ducts are equipped with the necessary safety devices, they are prone to arcing and explosion. Unlicensed technicians can also injure themselves when attempting to diagnose the problem. A common problem is a leak in a drainage pipe or pan. In some cases, the leak could cause serious damage to the wall or AC unit.
If you suspect a leak, a qualified technician will locate the problem and repair it accordingly. Using a video camera can also help a technician identify the source of a water leak. Identifying the leak can also help them find a replacement part. If the Overflow switch in your air conditioner is not working properly, you may have a clogged drain pipe.
To avoid this, open the drain pipe and remove any clogging debris. In many cases, simply resetting the safety switch will fix the problem. Be sure to take note that not all systems are equipped with safety switches. In some cases, a circuit breaker or fuse pullout may be the problem.
Oftentimes, the Overflow switch will be triggered by a rising water level. This can be caused by a broken drain line, clogged pan, or even mold growth inside the AC. If the Overflow switch is faulty, you should call an HVAC technician for an inspection.
A trained technician can diagnose the problem and recommend the best course of action. Alternatively, you may choose to repair the Overflow switch yourself.
