Selecting a split air conditioner is not as difficult a task as you think. When it comes to choosing the right unit, there are some crucial features to set your priorities on.
You must consider if you need a single or dual split AC system and which ones you should buy – single window or double.
It’s all about the comfort of living, especially at home. Most of us rely heavily on modern technology and appliances to make our lives easier.
But amidst all the electronic buzz around us, there are some very important factors that we ought to consider before air conditioner installation in Phoenix.
How to Install Split AC?
If you follow all these steps carefully, you can install your new split AC in less than half an hour.
Step 1 . Decide a Suitable Spot For Your Indoor Unit
This step is very important for air conditioner installation in Phoenix because it is where the most work will be done. We recommend that you look at the area and decide where you want to put it.
You may choose to put it on the wall or on top of a table or cabinet. If you choose to place it on top of a table or cabinet, ensure that there is enough space between it and any surface below it so that no water can flow into your floorboards.
Read Also:
Step 2. Mount the Mounting Plate
This step is required to secure the air conditioning unit within its designated spot securely.
To mount the mounting plate, use screws and an anchor kit to attach it securely into place before connecting the refrigerant pipe from the mounting bracket through the wall. Once this has been done, fill in any gaps with caulk or sealant around each screw hole.
Step 3. Pass the Refrigerant Pipe From the Mounting Bracket Through the Wall
After installing the mounting plate, you need to pass the refrigerant pipe through one wall of your house before connecting it with the outdoor unit using connectors which are usually provided with each package of split air conditioner parts along with detailed instructions on how they work together.
Step 4. Connect the Indoor And Outdoor Units Using Connectors
Connect the indoor and outdoor units using connectors. You first have to get a connector that fits perfectly with your current unit, which will be connected to another one. Then cut the electricity line and connect the indoor and outdoor units with proper tools.
Step 5. Fill the Refrigerant Into the Pipes
Fill the refrigerant into the pipes. Be sure to do this before positioning your unit in its final position, or else it may leak refrigerant into your home. This can damage your property or have other negative consequences for you and your family, so be careful!
Conclusion
Though air conditioner installation in Phoenix is not a big deal, it needs to be done correctly. You cannot assume that the work will be done correctly by the technician just because you have paid him.
You should check everything. If you are not satisfied with their work, you should stop and ask for a refund or hire someone else for the same work.