When you have a house, you surely keep an eye on anything that might not function properly. And there are quite a few problems that can appear and that can put your life and your family’s life in danger.
The most crucial problem is a damaged circuit. All houses have electricity. And even though its malfunction is not common, these things can happen.
And one of the main reasons it does is because of damaged wire circuits. So, how should you locate a damaged circuit when your house suffers from an electricity malfunction? Find out below.
What You Need to Locate a Damaged Circuit
Being safe is one of the principles you should have in mind whenever you want to do something that involves a low or high amount of danger. Some electricity malfunctions can be easily solved by owners, but some can be handled only by a professional.
This is something to keep in mind, especially if you feel you have an electrical malfunction that is beyond your solving abilities. However, locating a damaged circuit on your property is not so dangerous because there are some protective measures you can take.
You need to wear gloves and make sure that all the devices are switched off. At the same time, you need to work away from water.
There is a tool you can use to locate damaged wire circuits called a multimeter. It is a tool that is handheld and that can measure some important things such as voltage, resistance, or amperage.
From these values, you should identify if there is a broken wire or not. These tools and protection measures increase your safety. But they do not tell you which are the most common places where a damaged wire circuit might be.
To identify a located damaged circuit in your house, you need to think about the most used switches and power outlets in your house. A damaged wire circuit can be caused by a wide variety of options.
Maybe they have not been correctly set when they were first installed. Or maybe they have loosened over time, as it usually happens in the case of switches and power outlets.
So, if you use the power outlet or the switches and you hear a cracking sound, you should know that there might be a damaged wire connection.
Depending on how these connections are made, you should solve the problem. If you feel you do not have enough experience in your resume for a job like this, ask a professional for help. Some wires might need to be changed or tightened.
Electrical Taped Wires
Another place you could look for damaged wire circuits is in the places where you have many wires taped together. This is usually a temporary solution many people choose, but one that could cause your electricity malfunction.
Wires that are held together with the help of electrical tape could deteriorate. You need to check if the connection between them is good enough.
If not, you can cut a part of the damaged wire, strip the insulation, and try to connect it with the other wires. Keep in mind that you need to hold the wires together with electrical tape, rubber, or a plastic cape.
If you have exposed wires in your house, you should know that this is something you need to avoid at all costs. A professional can help you cover them so that both you and your family will be safe.
When exposed wires have contact with metal or other wires, they can cause an electrical malfunction. Moreover, if someone from your family touches it with their wet hands, their health might be in danger.
So, it is therefore important to identify any exposed wires you may have in your house and cover them. At the same time, you need to see if the remaining wires are connected under a wire nut connection.
If you feel you cannot handle this problem, make sure you ask the help of a professional. In this case, any exposed wires should be covered or connected better with the other ones.
Check the Main Service Panel
Best resume writers suggest that when your house suffers from an electrical malfunction, a damaged wire circuit can be the reason why this happens.
So, locating the wire damage is essential and among the places and things you should check is the main service panel. There are so many wires that one or more of them could have loosened.
At the same time, these service panels are installed in a room where rodents have access, and they might have chewed on the wires. Either the reason for this electricity malfunction, identifying the wire damage is mandatory.
Here you should check each wire connection to the circuit breakers. If there is a broken wire, you should cut the damaged tip and strip a part of the insulation.
However, there are many other electrical issues the main service panel could have. Usually, solving these kinds of electrical problems is the responsibility of a professional. Many changes should be done and if you are not an expert in the field, you should ask someone who is knowledgeable for help.
When your house suffers from electricity malfunction, solving the problem becomes urgent. There are many reasons why this could happen.
Maybe the connection between wires has been loosened over time, as we know this usually happens. Maybe rodents have chewed on some wires. Or maybe an amateur has installed the entire electrical system wrong.
Either way, identifying a damaged circuit becomes mandatory. It is important to keep in mind that you need to be extremely careful when you handle these kinds of problems and wear protective equipment.
And if you feel you do not have the knowledge and experience to handle and solve these wire issues, then you should ask a professional for help.
Leon Collier is a blogger and academic writer from the UK who has vast writing experience. He loves to take on every challenge thrown at him and has the ability to deliver outstanding work regularly. When he’s not busy writing, he loves reading books and playing tabletop games with his friends. Follow him on Twitter @LeonCollier12.