- Step by Step Guidelines on How to Use PEX Crimp Tool
- Why Would You Use A PEX Crimp Tool?
- How to Use A PEX Clamp Removal Tool?
- Is It Possible to Reuse PEX Clamps?
- How Do I Choose Between PEX-A and PEX-B?
- What Makes PEX Plumbing Dangerous?
PEX Crimp Tools are a great way to seal and cut copper pipes. PEX crimping tool is used to create a compression joint in copper or CPVC pipes.
Do you want to know how to use PEX crimping tool? If yes, then you are at the right place. This guide will tell you what PEX crimping tool is and how to use it.
Step by Step Guidelines on How to Use PEX Crimp Tool
PEX Crimp Tools make plumbing repairs easier. But there are some basics that everyone ought to know when it comes to using tools like a PEX Crimp Tool.
Step 1: Safety and Prep Work
Safety is very important when it comes to using tools. You should always wear safety glasses and gloves while working with a PEX crimp tool.
Before you begin, be sure you’ve turned off the water to whatever pipe it is you’re working on. Then clean everything off with a rag and some rubbing alcohol to get rid of any dirt or dust that may interfere.
Also, never get the tool wet which can cause it to corrode and get rusty.
Step 2: Get the Right Crimper for your Pipe
There are different types of crimpers available. So it’s important that you get the right crimper for your pipe. If you need to use PEX fittings, and then buy a universal fitting or hybrid crimper capable of working on any type of fitting you come across.
However, if you are using copper or CPVC fittings, then buy a specific copper/CPVC crimping tool.
Step 3: Prepare Your Pipe
Before working with a PEX crimp tool, you have to prepare your pipe.
First, remove the pipe from the fitting and cut it in half before inserting it into a cutter capable of cutting the type of pipe you are using.
Then clean the ends of each part by removing any burrs or debris from the ends.
Step 4: Insert Pipe into the Crimper
Now you have to insert the pipe into a PEX crimper or cutter.
Make sure that both ends are lined up exactly how they were when cut and then place one end in at a time, ensuring that it’s correctly placed before tightening everything down with a vice grip or adjustable wrench.
Step 5: Cut Pipe to Size
Once the pipe is placed correctly, you have to cut it to size using a cutter capable of cutting the type of pipe you are working with before cleaning it up and prep its ends for installation by removing any burrs or debris.
Finally, attach each end back onto copper or CPVC fittings.
Why Would You Use A PEX Crimp Tool?
PEX crimping tools are a must-have around your home, especially for new construction. There are a lot of reasons you should invest in one.
For one thing, they make working with PEX plumbing much simpler and safer. For example, you can use them to replace or repair broken fittings without having to cut out the entire pipe, which saves both money and time.
They are also incredibly easy to use. You can even use them on existing PEX pipe systems with no modifications necessary.
How to Use A PEX Clamp Removal Tool?
To use a PEX clamp removal tool you have to do the following:
Step 1: Turn Water Off
Before you begin working with a PEX clamp removal tool, be sure to shut off the water supply. It’s important that you do this because it stops any liquid from accidentally dripping into your system and causing problems.
Step 2: Unscrew Clamp
Once you have turned off the water supply, go ahead and unscrew the clamp holding the PEX pipe in place. You should turn it counterclockwise to remove it or use a wrench for this step.
Step 3: Remove Pipe
Then you have to pull out the old pipe before cutting off any excess with a cutter capable of cutting the type of pipe you are working with.
Once your pipe is cut down to size, clean the ends and unscrew the threaded caps before screwing on your new PEX fittings.
Is It Possible to Reuse PEX Clamps?
No, you should always replace them with new PEX clamps.
This is because they are designed to be incredibly sturdy and will hold your plumbing system in place without fail. They are not reusable because it would be way too easy for them to get dirty or rusty, which can cause serious damage to your system.
But you can reuse the fittings and pipe though, as long as they aren’t damaged in any way. If everything is intact, simply screw on your new PEX plumbing supplies and you’re good to go.
How Do I Choose Between PEX-A and PEX-B?
PEX pipes and fittings can be made from either PEX-A or PEX-B materials.
The main difference is that while both are flexible and suitable for a variety of different temperatures, PEX-A offers slightly more strength and durability than PEX-B. PEX-A price is more expensive than PEX-B.
So, you should choose PEX-A if you are planning on heating your home with hot water that will reach the greatest possible temperature. But if you don’t plan on doing this, opt for PEX-B since it’s easier on the environment and your wallet.
What Makes PEX Plumbing Dangerous?
PEX has a lot of benefits, like being flexible and durable. But it’s also incredibly dangerous, especially toxic chemicals in PEX tubing.
For example, vinyl chloride in the inner linings of PEX pipe and fittings releases carcinogens when exposed to high temperatures or sun exposure.
Also, even though many people consider PEX tubing an environmentally friendly choice it’s actually not recyclable at all. So you should never cut it up and throw it out.
PEX crimp tool helps you to make your job easier to finish for replacement, repairing, or even new installation.
We hope this article will help you with the most basic of knowledge when it comes to using one. You can choose one for your job and enjoy doing it.