Garage doors do not call for regular maintenance.
However, the frequent rotting of the jamb needs immediate attention. Since the structure gets exposed to low-level moisture, it is susceptible to rot. If your existing frame is not functioning well and has gone out of order, you might have to install a new garage door.
In such a case, you must ensure precise door framing. Accurate measurement is necessary for ensuring proper placement of the door. Whether replacing the garage door or repairing the existing frame requires professional handling.
Once done with the measurement, it’s time to look for the best individuals to undertake the task. From the purchase till the final installation, you need professionals to guide you.
Although you may feel that DIY skills can help you with the job, the complexity of the process will result in uncalled challenges. You will require guidance from trained and professional individuals to get the job done in the right manner.
Prepare the Garage Door
If you observe the surface of the garage door’s entrance, you will observe waterproof intrusion on the tops and sides, known as trim. Different materials like vinyl, wood, or other materials help make these structures.
You must slide your blade below the edges to remove the frame. Moreover, you have to remove the seals between the garage door frames and the border. Be cautious of the nails on the jamb. Professionals use sharp blades for sliding under those rims. Once they complete this, they are ready to remove the frame.
Do Away with the Old Frames
Then comes the most critical portion of the game. Remove the jamb. These frames get cut at different angles, like 45 degrees at the header and top ends. Before removing the frames, the professionals at Legacy Door Co.
examine the structure closely to give you precision. They apply force to remove the framing and then go for the arrangement of the new frames. The understanding of frame installation is necessary for reducing damage leading to costly repairs.
Read Also:
Replace the Jamb
After taking accurate measurements, the professionals will cut out the new jamb. For allowing the expansion of wood, precise measurement is necessary. Moreover, proper fitting of the garage door frame is vital so that there is no gap in between.
There are different types of jambs that professionals use. These are flat-facing jambs, wide jambs, and much more. Only a learned professional is competent enough to undertake the task.
Position the New Jamb
After the cutting is over, the professionals install the new jamb to eliminate gaps. There must be at least a six-inch gap between the pins at the top and bottom for best results. Since it is a team effort, someone has to hold the structure when others hammer the nails.
After securing the jamb in position, the professionals will fix the trim. Placing the structure in the original location is necessary for eliminating gaps.
Following this, you will have to operate the structure to see that it functions well. Check all the seals for the cracks so that the door lasts longer. Lastly, a coat of attractive paint will finish the task in style.