You look at the appliance at home and notice that the dryers and heater machine got neglected? After the cold seasons, wherever you are drying, heating machines at home are your reliable assistant helping you finish the laundry and other hardcore house chores.
The dryer opens up, and you see the filter overflowing with lint. What could be another dryer concern do you got that makes you say, “can I handle this?”
Expert dyer cleaners dryer vent cleaning Solana Beach gives a heads up to every dryer owner, listing down common household dryer issues that you might be facing now:
- Overheating dryer machine
- Rumbling sound when using the dryer
- Clothes do not dry effectively at a given time
- Clothes come out with a burnt
- Dryer parts needing replacement
If you got one or more of the problems listed above, you surely need a dryer maintenance and repair team to help you out.
But to recognize the dryer problems that you can handle as simple as a loose screw, you need to know the essential parts of the dryer machine in and out.
Questions to Ask Before You Clean the Dryer Yourself
Dryer maintenance cab is quite a worry since any heating appliance brings danger. You got froe hazard or electrical shock to watch out for. Another major question that you might probably ask is who should clean my dryer.
Ask yourself these following questions:
- What are the do’s and don’ts when handling the dryer? Am I aware of them?
- Do I have all the tools I need for repairing any dryer parts?
- What are the precautions before handling wires and complex ductwork?
- Can I tell what parts of the dryer are damaged when it fails to turn on?
- Can I clean the dryer vents and tubes without professional help?
Dryer Exterior Cleaning
Cleaning the exterior parts of the dryer would be the easiest task. The dryer exterior is the one you can access without opening up the machine, and these would be the machine’s exterior skin or its outer wall.
Simple cleaning and wiping of the surface would suffice. When you wipe away moist and water droplets on the surface, it prevents the worse damage.
Also, lint and reside of clothes thread linger on the dryer’s cover and wall. These will be easy to see if you opt to clean the machine every after use. Doing so would prevent excessive lint build-up on the dryer vents and tubes.
Read Also:
Dryer Interior Cleaning
Uncovering the dryer interior would reveal to you its complex ductwork and other sensitive parts such as heating sensors and switches.
Here are the standard parts you would see cleaning the inside of the dryer:
The dryer vent
The vent and dryer tubes are parts you can observe attached to the dryer’s outside. However, these are extensions of what occurs inside the appliance.
The dryer vent includes tubes that serve as a passageway fr the air that flows from the machine that dries the clothes.
You could handle cleaning the dryer vent yourself, given you have the proper tools like a twisted brush that can effectively remove dust and lint that hide inside the tubes.
The vent tubes of the dryer are often challenging to reach. Most homeowners would eventually call a cleaning service to complete the task.
The dryer basket
Of course, something you can see when you open the appliance’s lid is the clothes drum or the dryer basket. This part can be the most used one, but despite that, the dryer basket could also be the one you would often neglect, like the vents.
The clothes drum would also be the area where the lint and the thread would gather, which may cause the clogging of dirt that blocks proper air circulation.
The Exhaust tube
The exhaust tube would be like the dryer vent that would also extend what you can see inside. The exhaust tube would also be located simultaneously as the vent.
The vent tubes and exhaust tubes would have far-reaching areas and narrow holes that would require specialized rolls to clean.
TO DIY or Not to DIY?
So, in conclusion, you can surely DIY cleaning the dryer, especially if you have a suitable cleaning device. In the end, it is best to hire a professional dryer vent cleaning services to take care of and handle complex tubes and vent compartments.
