Just like any other appliances, washing machines require repair. The common operation principles of these home appliances allow us to come up with a list of the frequent malfunctions and their reasons, which allows all owners to prevent negative consequences.
Servicemen fix numerous washing machines every week and frequently encounter the same malfunctions that belong to the typical group.
Having familiarized yourself with these malfunctions and their reasons, you will be able to prevent them and increase the life of your washing machine.
The malfunction associated with the water drain can be a curse for owners. Most often, something like this happens due to a clogged drain filter.
Fortunately, this is the most easily solved problem. All you should do is unscrew the drain filter at the bottom of the machine. Be prepared, all the water that is still in the device will leak out from the unscrewed knot.
The next reason may be a drain pump. This unit is located immediately behind the drain and most often, the pump blades are visible.
The pump can be accessed from the bottom of the washing machine and is generally easy to replace. The third reason for non-draining water is electronics, the so-called control module.
We do not advise you to get involved in the repair of the washing machine module yourself. It is better to contact the appliance repair in Toronto or visit the website https://fixappliances.ca/toronto-appliance-repair/ to arrange a meeting with the repairman.
Read Also:
The next slightly less popular breakdown is that it does not heat the water. In about 80% of situations, this is a result of a heating element failure.
Breakage is very common, and the quality of tap water adversely affects the spare parts. Getting to the heating element is not an easy task.
Rather, getting to it is just not difficult, but it can be difficult to dismantle it. It is necessary to dismantle the back cover of the washing machine, and a water heater is located in the space between the tank and the drum.
Usually, there is a water heating sensor in the heating element itself. This is the next reason for the lack of water heating, most often it is replaced along with the heating element itself.
Modern washing machines are not very reliable. The market dictates its conditions and for the equipment to be bought, it must be relatively inexpensive and moderately wear-resistant.
The noise during spinning is most likely associated with the wear of the bearing assembly, and to get close to it, it is necessary to disassemble the non-separable tank.
We do not recommend disassembling it if there was no relevant experience. In case you make mistakes by performing such repairs, the washing machine may receive even more damage as a result of water entering the wiring or the electric motor.
This is a very common and probably the most unpleasant problem for the repairman. Water circulates through almost every node of the washing machine, the first thing to check for leaks is the cuvette (powder receiver).
It is easily removed from its regular place. If everything is ok with it, it is worth removing the top cover and monitoring the passage of water in the running wash cycle – from the cuvette to the tank, from the tank to the drain hose.
Most often, the problem is solved by simply opening the water start tap on the washing machine. You also need to check the presence of water in the tap.
Next, what you should pay attention to is the water inlet valve in the washing machine. They are located immediately under the top cover, the water supply hose is screwed directly into them.
Replacing them is not a very laborious process. With certain skills, you can cope quickly enough.
The machine may be “silent” when the wash start button is pressed, including due to a failed control module. Do-it-yourself repair of the washing machine control module is not recommended because it is associated with serious consequences.
In this case, we recommend contacting electronics specialists. They have all the necessary software and can restore and test the performance of electronics.
As you can see from the above, the washing machine is not as simple a device as it might seem. Breakdowns happen.
At the same time, you should not panic and immediately run to the store for a new device, because many malfunctions of the washing machine can be fixed with your own hands. If you can’t do it yourself, call the experts.
