Home Improvement

From Drips to Drains: How Plumbing Contractors Can Solve Issues

Plumbing plays an important role in every home, so when something goes wrong, it does need to be fixed fast. While there are some things you might be able to fix on your own, it’s a much better idea to hire a plumbing contractor to make sure the repair is done right and to prevent water damage or other issues in your home. Some of the things you can help with include the following.

Faucets are Dripping

Dripping faucets are more than just an annoyance. They can actually lead to a significant amount of water being wasted over time, especially if you don’t take the time to fix the leak as soon as it’s detected. When you call a Broussard Services plumbing contractor, they will look into what’s causing the leak and make sure it’s fixed properly. If needed, they can replace the plumbing causing the leak or install a new faucet that works properly.

No Hot Water

A lack of hot water can be a huge issue and it’s likely due to an issue with the water heater. Water heaters are not very complex, but they do have parts that can break down with use or wear, and they can be challenging to fix and repairs can be dangerous. Likely causes of no hot water can include issues with the thermostat, a leak in the water heater, leaking pipes leading to or from the water heater, or broken heating elements. Let a plumbing contractor do an inspection and handle the repairs when the water heater isn’t working.

Toilet is Running

If the toilet is running constantly or more than it should, it’s likely because of parts that have worn down or aren’t working properly anymore. While these can be simple repairs, there are times when the necessary repair is more complex or when the standard parts to fix the toilet aren’t going to work properly. In these cases, it’s better to have a professional handle the repair. They can make sure the toilet is working again and that it’s not wasting water. They’ll be able to handle any unusual issues that might arise or make sure all the parts fit to prevent further issues.

Drains are Clogged

Drains that are running slow aren’t going to get better with time. A little bit of baking soda and vinegar can help if the clog is small, but it won’t work in all situations. Neither will drain cleaners, which are harsh chemicals that can end up corroding the pipe over time. Instead, it’s a much better idea to hire a plumbing contractor to fix the clogged drain. They can get to the root of the issue, make sure the drains are fully cleaned, and provide information on how to prevent clogs in the future.

Leaking Pipes

A skilled plumber diligently fixing a dripping faucet
A skilled plumber diligently fixing a dripping faucet.

Leaking pipes do a lot more than wastewater. The leaking water can cause damage to the floor, walls, and other parts of the home over time, and it can end up causing mold to start growing in the home. Mold can be a health hazard, so it is crucial to take care of it fast. When you notice any signs of a leaking pipe, a contractor can repair it quickly and prevent potential damage to your home. Even if you aren’t sure where the leak is located, they will be able to detect the leak and make sure it’s repaired.

Also Read: Home Plumbing Maintenance Checklist & Maintenance Tips

Water Pressure is Low

A low water pressure likely indicates a leak somewhere in the home. Start by checking other faucets in the home to see if the water pressure is low there, too. If only one faucet is experiencing low water pressure, the leak is likely close to the faucet. If you have low water pressure throughout the home, it’s likely due to an issue with the main water line coming into the home, which can be harder to detect because the pipes are buried. While this could indicate an issue with the water company, if no neighbors are having issues with their water, it’s time to call in a professional for help.

Broken Garbage Disposal

Garbage disposals can help prevent clogs in the kitchen drains, but they must be used properly. There are quite a few things you can’t put in a garbage disposal, as they are likely to cause the blade to wear down faster or cause a clog. It is not recommended to try to clear a clog on your own, as it can be dangerous because of the blades if the unit turns on while you’re working on it. Instead, if you think it’s clogged or it does not work anymore, contact a plumbing contractor for help. They can clear clogs or, if needed, replace the garbage disposal with a newer model.

Increased Water Bills

If you notice a jump in your water bills, the likely culprit is a leak. A little bit of an increase can happen with more use in the home or hire rates, but if it jumps quite a bit from one month to the next, it’s time to look into what’s happening. If there is a leak, there could be a significant amount of water being wasted each day until it’s repaired. And, depending on where the leak is located, you might not notice the issue until there is significant damage done to the home. By paying attention to your water bills, you can spot issues like this faster and have them repaired before they cause even more problems.

Plumbing throughout the home should work as expected, but there are common problems that homeowners might notice. If you experience anything on this list or any other issues with your plumbing, it’s crucial to get help right away. A plumbing contractor can inspect your home, determine the cause of any plumbing issues, and make sure all repairs are done properly to prevent further issues for you. Call a plumbing contractor today to learn more about how they can help with the plumbing issues in your home.

FAQs (Frequently Asked Questions)

What can plumbing contractors do to solve dripping faucets?

Plumbing contractors can inspect the faucets to identify the cause of the dripping and then repair or replace any faulty parts to solve the issue.

How can a lack of hot water be addressed?

A lack of hot water can be addressed by checking the water heater for issues such as a malfunctioning heating element, thermostat, or sediment buildup, and then repairing or replacing the necessary components.

What should be done if the toilet is running constantly?

If the toilet is running constantly, it may be necessary to check and adjust the flapper, fill valve, or float to stop the running and ensure proper functionality.

How can clogged drains be effectively addressed?

To effectively address clogged drains, plumbing contractors can use methods such as snaking, hydro-jetting, or chemical drain cleaners to clear the blockage and restore proper drainage.

What are the potential consequences of leaking pipes?

Leaking pipes can lead to water damage, mold growth, higher water bills, and structural issues if not promptly repaired by a plumbing contractor.

What could a low water pressure indicate?

A low water pressure could indicate a leak somewhere in the plumbing system, which would require inspection and repair by a plumbing contractor to prevent further damage.

Share
Published by
Perla Irish