Concrete resurfacing is a common practice in the construction industry, and it’s one of the most commonly performed tasks by contractors.
If you’re thinking about hiring someone to resurface your concrete, it’s essential to understand what this process entails.
There is a lot of variation in terms of how much concrete resurfacing costs. It’s important to know that there is no single way to resurface concrete.
Some projects can require fewer coats, while others may require more layers of coatings. Costs can vary depending on the type of coating material and the type of equipment used to apply it.
Because there are so many different factors that go into a concrete resurfacing project, it’s difficult to pin down an average cost.
The most important thing to keep in mind is that no matter the cost, it’s an investment that will pay off over time.
If you’re interested in concrete resurfacing, don’t hesitate to reach out to JDL Surface Innovations to get started.
One of the most important things to understand about concrete resurfacing is that if you’re a commercial or residential property owner, your concrete can be resurfaced any number of times.
It’s not unusual to see concrete that’s been resurfaced more than once, and in some cases, it has been coated more than ten times.
Although the outer layers of the concrete are removed and replaced with each coating, the core remains intact.
The removal of the outer layers does not damage the structural integrity of the concrete.
If you’re thinking about resurfacing concrete, it’s essential to know that there are no limitations or guidelines regarding how often concrete can be resurfaced.
Read Also:
There are several different types of concrete coatings, and all of them can be applied in any number of ways. Some layers may be applied by brushing or spraying.
Others may be applied with a power washer or other types of pressure equipment. Some coatings are thin, while others can be applied using high-pressure hoses and spotters.
There are also many types of coatings containing some type of pigment, including white and black.
The finishing touches can include adding a colored finish to improve the appearance or removing the coating with pressure equipment to uncover an embossed pattern in the concrete. In ma
If you’re looking to make your concrete look new again, there are a few things you need to do before resurfacing it.
You may need special equipment, and you might want to hire a professional to do the job for you.
This is one of the most important questions you should ask before resurfacing concrete. If your concrete needs to be sealed, you’ll need to use a sealer before adding a new finish.
Failure to do so could ruin both of your coatings and the original concrete.
Did the surface get stained at some point? Does the surface have alkali-silica reactivity? Is water pooling on the surface no matter what time of year it is?
If you answered yes to any of these questions, then you should definitely look into sealing the concrete first.
Oxidized concrete has a yellow tint to it, and that’s because it’s developed high alkalinity. That means that water is more likely to pool on top of the surface and stain it.
But it also means that the surface has a high pH, which is excellent for staining concrete.
If you’ve got an oxidized concrete surface, then you’re in luck. Oxidized concrete is a lot easier to work with, and you can get your finished product with just one coat of sealer and an Epoxy or Polyurethane coating on top.
If you’ve got a porous surface, you will have to do some extra prep before resurfacing it. You need first to make sure that the concrete surface is completely free of debris and other hazards.
If there are cracks in the surface, you’ll need to fill them up before applying any concrete resurfacer.
If you’re looking to upgrade your concrete’s look, then you might want to consider staining it. Stains are easy to apply and give you a lot of options regarding color.
However, you’ll need to ask yourself a few questions before picking a stain. Will the stain fade over time?
Is the surface likely to get wet? If so, then you might be better off using a different finish for your surface.
