Once a year, you try to bring some changes to your home to make it look a little different and attractive for yourself and the guests.
This year, while renovating your house bath, you should install a framed shower door in your bathroom.
A glass shower door helps you give a modern touch to your restroom and make it elegant.
There are different styles and types of shower glass doors, such as framed, frameless, or semi-frameless shower doors.
All types of shower doors boost the ambiance of your bathroom and modernize it. The question is that which type of shower door should you go for?
The frameless glass doors look elegant, and they need expensive hardware and thicker glass.
Although, the framed glass doors are cheaper than the frameless units and are lesser in weight with the ability to bear more abuse.
So, over here, we are going to have a detailed view of the installation of a framed glass unit for your bathroom.
Once you are ready to install the framed glass door, then gather the necessary tools for installation.
Be sure to gather up all the things, if you missed something and started the installation process, you will create a mess for yourself.
These are some tools that you must have to complete your installation process smoothly.
Steps of Installation
In the first step, measure the place where you want to install your shower door.
Measure it precisely by keeping in mind that any inaccurate measure will lead you to face anxiety and trouble.
Take your time and measure all the sides accurately. If you feel fear of any inaccurate measurement, then measure it twice.
The first step in the shower door installation is of sheer importance. If you commit a mistake in this phase, then there are only hurdles in the further procedure.
Mark the place where your side rails are to be placed. Take the power drill and make holes in the walls on your marks.
After drilling holes in the wall, get the silicone and rub it on a threshold piece. Ensure to place the side rails properly at their defined place.
Now, take the plastic anchors and insert them in the pre-drilled holes. Once you place the side rails, use the screws to perfectly attach the whole thing.
Get the rubber spacers to hold the stationary side of your framed glass door. Rubber spacers help increase the distance in the middle of two objects that are to be enclosed together.
Using these rubber spaces on the stationary sides of your glass door, you will be able to restrain the water inside the shower door.
Read Also:
Place and move the stationary panel of the door over the threshold. Later, attach the top and middle rails to the side panel properly.
Press the glazing strip into the channel on both sides of the door with the help of a shim.
Here you are all set to wave goodbye to water leakages. Moreover, such glazing or seal strips restrains the air to come inside too.
Attach the hinges to the bottom rail after bringing the swing door in. Push the door into its place while pressing and holding it.
Following these five easy steps, you can install your framed shower door at home.
Installing a framed or frameless shower glass door at your home is an easy task. The shower glass enclosures beautify your restroom and give it an elegant touch.
With a simple yet modern replacement, you can turn your old bathroom into a new one. These glass panels are easy to clean and also give an illusion of wider space in your bathroom.
Moreover, it prevents the shower’s water from splashing out and creating a mess for you to clean.
If you have planned to get a framed shower door for your bathroom, then visit your nearest glass market and purchase the right shower door.
Further, if you are not free enough to install or buy a shower glass door, then you can visit the Fab Glass and Mirror website to order any type of shower door and get professional installation services too.
